The whole processing area is in depression.
The air is introduced into the area by means of special pumps while other pumps maintain a constant flow by conveying it directly to the plasma torch or to the gasifier.
The PLC, organized according to Industry 4.0 standards and therefore also equipped with remote control, regulates the entire system and, by means of sensors, can block the entrance of each single matrix to be processed, both the fluid and the solid component, or regulate the flow to and from the storage tank and the container.
The flows entering the plasma torch can be set independently so that they can only be activated when you are sure of the availability of a certain quantity of matrix or speed up the processing of a particularly aggressive or dangerous matrix.
The entrance to the waste area is equipped with nozzles capable of spraying the clearing room with disinfectants (for example 4% sodium hypochlorite) and high temperature ozonated water which will, in any case, be collected and sent to the tank for the liquids located inside the system. From here the liquids will be introduced directly into the plasma torch to be inertized, in turn.
A safety torch will be positioned outside to allow any gas release.
